Tag Archives: chain gears

China 1045 different type standard industrial sprocket Industrial Roller Chain Sprocket sprocket chain gears with Best Sales

Substance: S45C
Normal: ANSI
Design Quantity: DJ20145713003
Heat Therapy: Substantial Frequency induction hardening
Mounted Characteristic: Keyway & Established screw
Floor Treatment: Zinc plated
Hardness Rockwell Scale: forty five-fifty five HRC
Packaging Particulars: regular packing, carton box or as for every buyer necessity
Port: ZheJiang or ZheJiang

1045 various variety common industrial sprocket Industrial Roller Chain Sprocket sprocket chain gears


Substance C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless metal and so on as for every your request
method Cast
Warmth remedy Substantial frequency quenching, heat treatment method, hardened teeth
Floor treatment Blacking, galvanization, chroming, electrophoresis, shade painting, or consumer prerequisite
Efficiency High precision, large wear resistance, reduced sounds, sleek and continual, higher energy
Design quantity Normal or nonstandard (solitary duplex and triple)20A10-one hundred, Large Good quality Clamp Sort Double Plate Springs Coupling Manufacturing unit Value adaptable shaft coupling servomotor stepmotor connector 40A10-100, 60A10-100, 80A10-one hundred, 100A10-one hundred. 20B10-one hundred, 40B10-one hundred, 60B10-100, 80B10-one hundred, 100B10-one hundred
Payment,minimal order and delivery T/T (30% deposit in progress, 70% harmony ahead of transport). Minimal order is 100 pcs. Shipping and delivery time is twenty-30days after get deposit or negotiable
Packaging Inner plastic bag and outer carton box or client prerequisite.

Industrial Roller Chain Sprocket-Simplex Kind A

Product range from simplex,duplex,triplex quadruplex,quintuples,o on.
Hub design : Type A (Hubless) or Kind B (Hub) or Typle C (Hub on each dimension) or Kind D(detacheable bolt on hub)
Global Common : ANSI B29.1M
Materials Choice : 1045, 1571,nylon,20CrMnTi, SCM 415, stainless steel, SWC390WH with out flex welding type universal coupling Factory Price tag Large Quality Double universal joint cardan shaft coupling forged iron..and many others
Substance Aspects : Electricity transmission and velocity .Environment elements :Temperature and publicity to corrosive factor.

Organization Data
Dajin Corporation characteristic.

1.Rigid quality handle of whole manufacturing method from incoming merchandise to ending item.
2.Ready to supply the prompt shipping , high precision mechanical areas and lower price tag.
three.A extensive variety of precision in house machining capablities.
4.Industrial roller chain of sprocket design are simplex, duplex , triplex and quadruple..so on
5.A specialized skills is to meet up with the consumer prerequisite for drawings ,custom made style and solution.
six.Surface treatment this kind of as zinc plating ,black oxide.. etc
seven.Heat Therapy : Workpiece is heated by induction hardening and then quenching.
eight.Major export market place s are US, europe , south east asia, middle east and north of america.
9.Content can asked for by client this kind of as 1045 , 20mn,Stainless metal ,nylon, & solid iron ..and so forth
ten.OEM are welcome
11.Accredited by ISO certification

Market place

1. Japanese Asia
2. Southeast Asia
3. Mid East
four. Africa
5.South The us


one.The geographical placement edge:found in sprocket city,job produce every single variety of sprocket
2.cost advantage:on the fundamental of ensure of the amount,we reduction the feright of the cost,then give you the very best price
three. Precision Stamping

Payment and Delivery
one.payment is T/T,30% in progress,70% will be send prior to ship the items
two.supply time is 1month
three.moq is 100set, 2571 Vintage Necklace on Neck Gold Chain Women’s Jewelry Layered Necklace Components we do not head you order little

About the factory


Dajin Corporation aim is supply top quality, shipping and provider on time in responsiveness to customer need and prospect.
We sincerely welcome the two residence and abroad to inquire our item.


How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.


Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.


Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China 1045 different type standard industrial sprocket Industrial Roller Chain Sprocket sprocket chain gears     with Best Sales China 1045 different type standard industrial sprocket Industrial Roller Chain Sprocket sprocket chain gears     with Best Sales
editor by CX 2023-04-22

Reliable sales China Standard Stock Sprockets(NK) 180 Chain Sprockets for Transmission From China Gears and Sprockets

Reliable  sales  China Standard Stock Sprockets(NK) 180 Chain Sprockets for Transmission From China Gears and Sprockets

Detail Informatio We are aiming to meet the demands of the clients around the world.. a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….n

Roller Chain Sprocket – Japan Standard Series – 180 roller chain sprocket dimensions

Ansi Roller Chain Sprockets Specifications

Tooth Width  33.0 Chain Pitch 57.15
Hub Configuration B Roller Dia 35.71
Internal Width 35.72 Chain Number 180
Number of Teeth 11-60 Number of Chain Rows 1-2-3
Min bore size 45 Max bore size 150
Hardened Teeth Up to customer Steel Durable Standard Stock Bore Sprockets
Black Oxide Up to customer
Bore Type Stock Bore

Product Information


* Standard sprockets

* Customized sprockets


Quality Assurance:

ISO9001: 2015 and
GB/T24001-2016 / ISO14001: 2015.


High quality

√Corrosion resistance

√Durable, Robust and

√Bad condition

√Lower weight–high

Adapted to

√roller chains based on the requirements
of ISO/R 606

√all sprockets with pilot bore

√available with type A platewheels,simplex
roller chain

√sprockets,duplex roller chain
sprockets,triplex roller chain sprockets,four strand roller chain sprocket

√material used for chain sprocket carbon steel

√ heat treatment and special surface treatments
are available on request:

black oxide sprocket with teeth hard


√Surface treatment

√Hardened teeth

√Serious quality control


Application industries:


√Building Material
√Oil and Gas

√Technology and Science


Reliable Standard Stock Sprockets

Distributor of precision roller chains made from carbon steel. Available with 0.200 to 1.875 in. roller dia. Flat top, multi-flex and conveying chains are also offered.